¿Necesitas algo en especial?

Si necesitas algo distinto a nuestros productos destacados, revisa alguno de nuestros catálogos aquí o envíanos un correo, un asesor fluidtech se comunicará contigo.

Ver catálogos

Catálogo oilandgas

 
                                
                            
API 7K-FSL 2 GRADE “D” ROTARY MUD HOSETube: Nitrile
Reinforcement: Two layers of high strength steel wires cables, 
                                            rubberized textile plies
Cover: Black, abrasion, corrosion, cutting, gouging, oil
                                            and weather resistan
Temperature: -30°C to 82°C (-22°F to 180°F) 
Application: Flexible connection between standpipe and swivel
                                            (Rotary Drilling) or between pump and standpipe (Vibrator) for pumping

searchVer ficha técnica

                                  
                            
RIG FLOW 3000 KELLY HOSETube: Nitrile
Reinforcement: Six spiral layers of high tensile steel wire
Cover: Black, oil, abrasion and weather resistant 
                                            synthetic rubber, MSHA approved
Temperature: -40°C to +121°C (-40°F to +250°F)
Application: High-pressure rotary hose for slim-hole, seismograph, work-over or portable drilling rigs. For use with small 
                                            to medium- blast, water-well or shot-hole drilling applications. Used in hydraulic or mud drilling applications where 
                                            pulsating pump is required

searchVer ficha técnica

                                
                            
RIG FLOW 5000 SLIM HOLE ROTARY DRILL HOSETube: Nitrile
Reinforcement:  Four spirals of high tensile steel
Cover:  Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: -40°C to +121°C (-40°F to +250°F)
Application: High-pressure rotary hose for slim-hole, seismograph, work-over or portable drilling rigs. For use with small 
                                            to medium-blast, water-well or shot-hole drilling applications. Used in hydraulic oil, mud or 
                                            where pulsating pump is required.

searchVer ficha técnica

                                
                            
CX 100R15 SIX SPIRAL WIRE HOSETube: Nitrile
Reinforcement: Six spiral layers of high tensile steel wire
Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: -40°C to +121°C (-40°F to +250°F)
Packaging: Coils
Application: Hydraulic systems with petroleum or water/glycol based fluids and for fuel and lubricating oils.

searchVer ficha técnica

                                
                            
VX 100R13 SIX SPIRAL WIRE HOSETube: Nitrile
Reinforcement:  Six spirals of high tensile steel
Cover:  Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: -40°C to +121°C (-40°F to +250°F)
Packaging: Coils
Application: Hydraulic systems with petroleum or water/glycol based fluids and for fuel and lubricating oils.

searchVer ficha técnica

                                
                            
VZ 100R13 SIX SPIRAL WIRE HOSETube: Nitrile
Reinforcement:  Six spirals of high tensile steel
Cover:  Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: -40°C to +121°C (-40°F to +250°F)
Packaging: Coil length 200’ continuous
Application: Hydraulic systems with petroleum or water/glycol based fluids and for fuel and lubricating oils.

searchVer ficha técnica

                                
                            
NX FOUR SPIRAL WIRE HOSETube: Nitrile
Reinforcement: Four spirals of high tensile wire
Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: 40°C to +121°C (-40°F to +250°F)
Packaging: Coils
Application: Hydraulic systems with petroleum or water/glycol based fluids and for fuel and lubricating oils.

searchVer ficha técnica

                                
                            
NT300 FOUR SPIRAL WIRE HOSETube: Nitrile
Reinforcement: Four spirals of high tensile wire
Cover: Synthetic rubber, high abrasion resistant, meets requirements of MSHA fire resistance standards
Temperature: -54°C to +121°C (-65°F to +250°F)
Packaging: Coils
Application: Extremely flexible with a bend radius less than standard spiral hose and has a high abrasion resistant 
                                            cover. NT300 is ideal for hydraulic systems with petroleum, polyol ester, or water/glycol based 
                                           fluids. Hose is USCG accepted for hydraulic service.

searchVer ficha técnica

                                
                            
NZ FOUR SPIRAL WIRE HOSETube: Nitrile
Reinforcement: Four spirals of high tensile steel
Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: -40°C to +121°C (-40°F to +250°F)
Packaging: Coil length 200’ continuous
Application: Hydraulic systems with petroleum or water/glycol based fluids and for fuel and lubricating oils.

searchVer ficha técnica

                                
                            
BOP HOSEApplication: Blow out preventor hose, used for hydraulic connection 
                                            between the well control equipment and the control system. 
Tube: Black Nitrile
Reinforcement: 2 wire steel braid
Cover: Wrapped pink neoprene
Temperature: -40°C to +121°C (-40°F to +250°F)


searchVer ficha técnica

                                
                            
ARMORED BOP HOSEApplication:  Blow out preventor hose, used for hydraulic connection 
                                            between the well control equipment and the control system.
Tube: Black Nitrile
Reinforcement: Braided/Spiral construction.

searchVer ficha técnica

                                
                            
DR11 FRAC HOSE WITH PRO SHIELDApplication:  Oil/gas fracturing hose, for delivery of drilling water, mud, 
                                          oil slurry mixtures and crude oil.
Tube: Black smooth NITRILE rubber compound
Reinforcement: High strength RAYON cord plies
Cover: Black smooth, specially formulated synthetic rubber, to be 
                                            used where a (HARC) Highly Abrasion Resistant Cover is required.

searchVer ficha técnica

                                
                            
DR12 FRAC HOSE WITH PRO SHIELD IIApplication: Oil/gas fracturing hose, for delivery of drilling water, mud, oil 
                                            slurry mixtures and crude oil
Tube: Black smooth NITRILE rubber compound
Reinforcement: High strength RAYON cord plies
Cover: Black ultra smooth, polyethylene, high abrasion resistant 
                                        rubber cover(HARC) that provides excellent weather and ozone protection for maximum abrasion resistance.
Temperature: -32°C to 70°C (-25°F to 158°F) 

searchVer ficha técnica

                                
                            
DR13 FRAC HOSE WITH PRO SHIELDApplication: For delivery of brine, fracturing fluids, mild chemicals, 
                                            petroleum waste, sediments, sludge, sand slurries, and water.Applicable in frac tank transfer, oil field waste recovery and general 
                                            industrial environments
Tube: Black seamless SBR blended compound
Reinforcement: High strength RAYON cord plies
Cover: Black, smooth synthetic High Abrasion Resistant rubber 
                                            compounded to withstand oil traces, weather, and 
                                           ozone.

searchVer ficha técnica

                                
                            
DR14 FRAC HOSE WITH PRO SHIELD IIApplication: For delivery of brine, fracturing fluids, mild chemicals, 
                                            petroleum waste, sediments, sludge, sand slurries, and water. 
                                            Applicable in frac tank transfer, oil field waste recovery and general 
                                            industrial environments.
Tube: Black seamless SBR blended compound
Reinforcement: High strength RAYON cord plies
Cover: Black, ultra smooth, polyethylene, high abrasion resistant 
                                            rubber cover (HARC) that provides excellent weather and ozone 
                                            protection for maximum abrasion resistance
Temperature: -32°C to +70°C (-25°F to +158°F)

searchVer ficha técnica

                                
                            
DR30 FRAC TANK HOSEApplication: Connection of frac tank manifolds and systems used for the 
                                            delivery and recovery of drilling water, frac solutions, and 
                                            water based slurries where extreme flexibility and low force to bend is 
                                            required.
Tube: Black smooth synthetic rubber compound
Reinforcement: High strength RAYON cord plies & embedded helix wire.Cover:
                                            Black corrugated, high grade synthetic rubber 
                                            compounded for excellent resistance to weather and 
                                            ozone.

searchVer ficha técnica

                                
                            
PE08 CORRUGATED OIL FIELD VACUUM HOSEApplication: Tank truck service, including oil field vacuum truck, where 
                                            full suction or rated working pressures are required. Ideal 
                                            for applications handling crude oil, salt and fresh 
                                            water, tank bottoms, drilling mud, dilute solutions of 
                                            hydrochloric acids, diesel fuels and sewage transfer.
Tube: Black smooth synthetic rubber compound
Reinforcement: Synthetic yarn with a steel wire helix
Cover: Black corrugated
Temperature: -40ºC to +66ºC (-40ºF to +150ºF)

searchVer ficha técnica

                                
                            
PE10 PETRO-FLEX CORRUGATED TANK TRUCK HOSEApplication: For use with petroleum based products with aromatic content 
                                            up to 50%. An all purpose petroleum suction and discharge 
                                            hose. For tank truck & in plant operations to transfer gasoline, 
                                            kerosene, diesel, fats, grease, animal and vegetable oils - may also 
                                            be used for hydraulic suction and return lines. Rated full vacuum.
Tube: Black smooth synthetic rubber compound
Reinforcement: Synthetic yarn with a double wire helix
Cover: Black corrugated
Temperature: -35ºC to +100ºC (-31ºF to +212ºF)

searchVer ficha técnica

                                
                            
PE18 PETRO-FLEX 300 HD TANK TRUCK HOSEApplication: Premium high pressure petroleum transfer hose for handling 
                                            ethanol blend, gasonline, oils, and other petroleum products 
                                            at higher working pressures
Tube: Black smooth synthetic rubber compound
Reinforcement: Spiral-plies fabric with wire helix
Cover: SBR

searchVer ficha técnica

                                
                            
PE20 TANK TRUCK DROP HOSEApplication: Gasoline tank truck gravity drop hose for such items as 
                                            naphtha, kerosene, light and heavy oil, diesel and up to 15% 
                                             gasohol.
Tube: Nitrile
Reinforcement: Synthetic yarn with static grouding wire
Cover: Flexible orange PVC helix 

searchVer ficha técnica

                                
                                
                            
DOCK OIL TRANSFER HOSEApplication: Heavy duty suction and discharge dock hose designed for
transferring petroleum product up to 50%aromatic content
from tankers and barges,bunkering service and industrial applications
Characteristic:
C/W built-in flanges with one side fixed and one side swivel
Heavy duty construction for 300psi
Designed for petrol products up to 50% aromatic content
High abrasion,ozone & weather resistant cover

searchVer ficha técnica

                                
                                
                            
FLOATING MARINE OIL HOSEApplication: The floating marine oil hose is designed for transportation of crude oil and liquid petroleum products between loading and unloading vessels at ofKFSHore mooring systems.
Characteristic:
Indepent foam floating casing to prevent water absorption
CR outlayer with excellent resistance to abrasion
,UV,aging and corrosive environment
Easy installation and less maintenance
Cutomized steel flanges are available

searchVer ficha técnica

                                
                                
                            
FLOATINGDREDGING HOSEApplication: The floating dredging hose are intended for port and dock
discharing of sea water,silt, sand and other dredging application. They are commonly used in part of the
construction process of docks and ports.
Characteristic:
The outer cover is made from a rubber compound that is
higly resistant against weathering, UV and Ozone
Wear indicator layers can be implemented in the dredge hoses which transport abrasive medium
A single foam floating layer prevents water absorption. The hose emergence above the water is not less than 20% of the
total volume
Custom flanges are available. Bending angle: in working conditions, the bending angle is
from 0°to +45°.

searchVer ficha técnica

¿Necesitas algo en especial?

Catálogo oilandgas

API 7K-FSL 2 GRADE “D” ROTARY MUD HOSE

RIG FLOW 3000 KELLY HOSE

RIG FLOW 5000 SLIM HOLE ROTARY DRILL HOSE

CX 100R15 SIX SPIRAL WIRE HOSE

VX 100R13 SIX SPIRAL WIRE HOSE

VZ 100R13 SIX SPIRAL WIRE HOSE

NX FOUR SPIRAL WIRE HOSE

NT300 FOUR SPIRAL WIRE HOSE

NZ FOUR SPIRAL WIRE HOSE

BOP HOSE

ARMORED BOP HOSE

DR11 FRAC HOSE WITH PRO SHIELD

DR12 FRAC HOSE WITH PRO SHIELD II

DR13 FRAC HOSE WITH PRO SHIELD

DR14 FRAC HOSE WITH PRO SHIELD II

DR30 FRAC TANK HOSE

PE08 CORRUGATED OIL FIELD VACUUM HOSE

PE10 PETRO-FLEX CORRUGATED TANK TRUCK HOSE

PE18 PETRO-FLEX 300 HD TANK TRUCK HOSE

PE20 TANK TRUCK DROP HOSE

DOCK OIL TRANSFER HOSE

FLOATING MARINE OIL HOSE

FLOATINGDREDGING HOSE

¿Alguna duda?

Envíanos un mensaje y en breve un asistente técnico de Fluidtech se pondrá en contacto contigo para brindarte el soporte que requieres.

¡Juntos encontraremos la solución a tus necesidades!

Aquí podras encontrar

¿Necesitas algo en especial?

Catálogo oilandgas

API 7K-FSL 2 GRADE “D” ROTARY MUD HOSE

RIG FLOW 3000 KELLY HOSE

RIG FLOW 5000 SLIM HOLE ROTARY DRILL HOSE

CX 100R15 SIX SPIRAL WIRE HOSE

VX 100R13 SIX SPIRAL WIRE HOSE

VZ 100R13 SIX SPIRAL WIRE HOSE

NX FOUR SPIRAL WIRE HOSE

NT300 FOUR SPIRAL WIRE HOSE

NZ FOUR SPIRAL WIRE HOSE

BOP HOSE

ARMORED BOP HOSE

DR11 FRAC HOSE WITH PRO SHIELD

DR12 FRAC HOSE WITH PRO SHIELD II

DR13 FRAC HOSE WITH PRO SHIELD

DR14 FRAC HOSE WITH PRO SHIELD II

DR30 FRAC TANK HOSE

PE08 CORRUGATED OIL FIELD VACUUM HOSE

PE10 PETRO-FLEX CORRUGATED TANK TRUCK HOSE

PE18 PETRO-FLEX 300 HD TANK TRUCK HOSE

PE20 TANK TRUCK DROP HOSE

DOCK OIL TRANSFER HOSE

FLOATING MARINE OIL HOSE

FLOATINGDREDGING HOSE

¿Alguna duda?

Envíanos un mensaje y en breve un asistente técnico de Fluidtech se pondrá en contacto contigo para brindarte el soporte que requieres.

¡Juntos encontraremos la solución a tus necesidades!

help Sección de ayuda

¿Cómo funciona la Página Principal?

¿Cómo funciona el Menú de Categoria de Mangueras?

¿Como registrarte en solicitud de crédito?

¿Como registrarte en solicitud de pruebas hidrostáticas?

¿Como registrarte en solicitud de asesoría para una cotización?

¿Como registrarte en solicitud de levantamiento de requerimientos en sitio?

¿Comó realizar una cotización?

Sección de ayuda